There is a constant issue practically every homeowner encounters when dealing with a garage door: a misaligned garage door track. Whether your track is bent out of shape or your hardware is loose, this issue will flat-out ruin the entire functionality of your garage door. Allowing this problem to run its course will only pose a safety hazard, placing your entire family in danger whenever they are near your garage door.
Fortunately, you don’t have to worry about this problem. In this blog, we will provide you with some much-needed tips and tricks so you can effectively handle any misaligned garage door track repair. Continue reading this blog to get your garage door back on track.
Misaligned Garage Door Track Repair Tips
Over time, the continuous use of a garage door can result in loose hardware and bent tracks. These symptoms will only worsen as time passes if nothing is done about them. To prevent your garage door from further damaging itself, you need to recognize the signs of misaligned garage door tracks and take action immediately.
Inspect Your Garage Door Track
Before you begin repairing your garage door track, you must first thoroughly inspect it. To do so, look for any signs of damage, such as dents or loose hardware. Inspecting the rollers, hinges, and mounting brackets will help you determine the source of the misalignment. Also, keep an eye out for any obstructions, like debris or any objects stuck in the track. Your issue could be solved simply by cleaning the track and removing this debris.
Tighten Loose Hardware
To officially start the repair process, make sure all loose hardware is tightened. Loose hardware is one of the most common causes of track misalignment, and it is easily corrected with a wrench or socket set. Simply tighten all the nuts, bolts, and screws that secure the track.
Pay special attention to the mounting brackets, roller brackets, and hinges. If these are not securely fastened, your garage door will be unstable and out of alignment, potentially causing damage. Doing this will fix any minor misalignment issues, improving your door’s performance.
Straighten Bent Tracks
A more obvious reason for your track misalignment problems is a bent track. If you notice any bent sections on the tracks, it’s essential to straighten them for proper alignment. First, manually lift the garage door and watch its movement as you straighten the track.
Using pliers, gently apply pressure to gradually straighten any bent areas. Make sure not to use too much force when doing this, or the damage will only worsen. If the bend is too stubborn to straighten, use a rubber mallet. Gently tap the track lightly to straighten it. This ensures that the door glides smoothly along the repaired section.
Call Simple Garage Door Repair
Repairing a misaligned garage door track doesn’t have to be a daunting task. With these tips and tricks, you can confidently tackle the repair process. Remember to conduct a thorough inspection, tighten loose hardware, straighten bent tracks, and adjust track alignment. However, for complex issues or if you’re uncertain about performing the repairs, it’s best to get a professional’s insight.
There is no better team to assist you than the one here at Simple Garage Door Repair. When you give us a call, you can expect nothing short of top-of-the-line services and professionalism. Our team is dedicated to providing you with any garage door service you need, whether it be repairs, maintenance, installation, or anything else. Give us a call to get the service you need, and your garage door track will be whipped into shape in no time. It’s really simple.